Nordlys Frax 1940 And Frax 1550
Nordlys Frax 1940 And Frax 1550
Frax 1940 / Nordlys Laser
The Frax & Nordlys system from Candela comprises gentle laser & light treatments. Lasers use specific wavelengths to target skin concerns including pigmentation, pore size, redness, wrinkles & dull skin. Each laser has a specific role to play. Different lasers are employed to treat different skin types & presentations.
Facts On The Frax 1940 Laser
- This laser is classed as a fractional laser, treating predetermined portions of skin
- Frax 1940 is ideal for addressing pigment, dull skin, sun damage & wrinkles
- This laser is non-ablative, meaning it has a quick healing time
- Recovery ranges from 4 to 5 days
- Most patients require 1-3 sessions, depending upon your expectations
- Addition of retinoic acid directly after laser can improve clinical outcomes
What is the Frax Nordlys Laser?
This is a new & novel wavelength for 2022 & beyond. This laser is best for mild to moderate pigmentation, sun damage & wrinkles in lighter skin types.
It was developed to compete with Fraxel Dual, namely the 1927 & 1550 wavelength. The target for this laser is water in the upper epidermis & the papillary dermis. The depth of penetration for 1940 is deeper than Fraxel. The density coverage & power is equal (70%, up to 20 mj). Delivery of the laser beams are linear & sequential with the Frax.
What skin conditions can Frax 1940 laser treat?
Concept to understand: each laser wavelength plays a specific role. If a clinic has limited wavelengths & lasers, you may have a compromised treatment. The Frax 1940 laser is advertised as a multi-treatment platform that can address everything from melasma to wrinkles. My main indications are:
- Pigment or dyschromia in lighter skin types 1-2.
- Fine lines & wrinkles
- Sun damage including sunspots & broken collagen (elastosis)
- Mild skin laxity in lighter skin types
What condition can NOT be treated with Frax laser?
This laser is good for superficial skin conditions. It does not treat:
- Melasma (other lasers do a much better job)
- Skin laxity (mild cases can respond)
- Volume loss (only fillers or fat transfer can do this)
- Acne scars (different methods required)
- Deep wrinkles (Co2 lasers are much better)
- Stretch Marks
What skin types can be treated with Frax 1940/1550 laser resurfacing?
Lighter skin types are suited for Frax 1940. This means Caucasian skin types. Darker skin types can be treated with this wavelength; however laser settings are conservative, namely lower energy & passes. Darker skin patients should be treated with pico lasers.
Does Frax laser resurfacing hurt?
Treatments are well tolerated as we use a high concentration of numbing gel (prescription gel). This is augmented with cooling if required.
Post laser your skin will feel warm for 6 to 8 hours. No pain relief is required.
How many treatments will you need?
1-3 depending on your skin concerns, your skin type & downtime. The average patient has 2 treatments spaced 4-8 weeks apart.
What is recovery like?
Recovery will depend on the settings we employ. We will give you an accurate estimate of downtime before the procedure. As a guide:
- Day 0-2 Redness
- Day 2-5 Shedding of skin. Makeup is not advisable during this period.
- Day 5-7 Recovery. Make up can be worn
- Day 7-9 Skin returns to normal
How does this compare to Fraxel & other fractional laser resurfacing?
The Frax system by Candela competes with other fractional laser systems such as Fraxel Dual & LaseMD by Lutronic. Each device has their pros and cons. Frax uses very similar wavelengths compared to Fraxel, namely 1940 (close to 1927) & 1550.
Fraxel is a good laser however it has consumables that are passed on to the patient. The Frax 1940 & thulium 1927 lasers are very similar, but it is more cost effective for the patient. The downside with Frax is the speed of resurfacing- typically 2-3 times longer than other fractional systems. Results are dependent on the clinic, not the laser.
How does Frax 1940 compare to HALO laser resurfacing?
I have used both systems. The HALO uses two wavelengths, one at 2940 (erbium) & at 1470. The ablative wavelength of HALO goes to 0.1 mm & the non-ablative goes to 0.7mm. The Frax is shallower but gives better results for superficial lesions. The HALO can be tuned for dermal pathology.
I use less of the erbium HALO wavelength, & I prefer the CO2 & thulium combination. This gives a much better result than HALO, at a third of the price with only one treatment.
What treatment is one level up from Frax 1940?
If you have stubborn pigmentation, spots & dots including seborrheic warts, sebaceous hyperplasia & deeper wrinkles/laxity, a higher-level laser is recommended.
I normally combine a CO2 fractional laser with 1927 Thulium. This is known as Hybrid laser resurfacing. Downtime is extended by 48 hours, but the results are much better than a single laser wavelength like Frax 1940.
What treatment is one level down from Frax 1940?
If you would like to explore laser skin rejuvenation but you are still apprehensive, one level down is a diode 1927 laser. This has a ‘downtime’ of 1-3 days. You will be pink for the first few hours, followed by a very light superficial peel at day 2-3.
Another option is pico laser resurfacing or gentle fractional CO2. Downtime is minimal, pain is minimal, cost is minimal. These lasers are best for mild pigmentation, fine lines, & prevention.
Can Frax 1940 treat melasma?
Though white papers & case studies suggest that this laser can treat melasma, in real life you have a great chance of flaring up this condition with lasers such as Fraxel Dual, Frax 1940, Frax 1550, Fraxel Dual & IPL.
The best lasers for melasma are the nano Spectra & pico lasers.
When can you restart your normal skincare routine again?
You can recommence your skincare routine at day 7 to day 12 post laser resurfacing. My clinical staff will guide you through this process. As a rule:
- Actives such as retinol, AHA, vitamin C, start slowly. Eg. every second or third night, increase weekly as tolerated.
- Vitamin B (niacinamide), hyaluronic acid can be reintroduced early
- BHA washes start at the end of week one.
What are the risks of Frax fractional laser resurfacing?
Frax 1940 & 1550 lasers are considered light (ish) resurfacing. On a scale of 1-5, it sits around level 2. Side effects are uncommon, but include:
- Infections including bacterial & viral
- Melasma flare ups: hence why we don’t treat melasma patients with this laser
- Gridding: can occur. Rare side effects.
- Redness – rosacea flare
Any questions please use the following details below to get in touch.
Everyone is unique. This means that sensitivity periods, treatment plans, treatment results and their longevity will vary from patient to patient depending on skin type & elasticity, age and lifestyle. The information on this page is based on the average treatment experience. For more accurate information, you should make a consultation with one of our beauty experts. There is possibility of swelling, redness, and a recovery period after the treatment. Depending on treatment most patients can return to work immediately.
We do not refund any treatment packages or any treatments that have already been carried out. All booked packages of our beauty treatments must be redeemed within 12 months of purchase, otherwise no refund will be provided for the missed treatments.